Wszystkie produkty

100 psi.Can be used on its own, or with a Pump Controller.Unique 12 month WFP Warranty.W

12 VDC, 5.5 LPM, 3/8" NPTF ports, with pressure switch set at 100 PSI, polypropylene head, Viton valves, seals, and o-rings. .

For use with any reel accepting a 1/2" female connector, which you can then connect a PRO 26 female coupling onto.

Allows the connection from reel to swivel freely.

No Leaks, No Strain.

We recommend regular greasing of the elbow to ensure longevity.

For use with any reel accepting a 1/2" female connector.

Allows the connection from reel to swivel freely.

No Leaks, No Strain.

We recommend regular greasing of the elbow to ensure longevity.

HS Code 8421210000

GrippaPRO LP 4021" Membrane - Manufactured in the USA
Designed for use within the GrippaMAX range of filtration systems
Industry competitive salt rejection rates of 98.5%
Robust construction with fibreglass outer wrap

11.5-13.5 2-Eared O Clips - Hose Clamps

Inner Ring Clips ensure the clamp fits snugly around the hose, whilst ensuring the hose is not pinched and damaged during installation. Stainless Steel.

Genuine John Guest Part.

Fibredyne CFBC Sediment/Carbon Pre-Filter 20"

Membrane 4” x 40”

Genuine John Guest Part
Tube OD:  5/16"
FFL Thread: 1/4"

GrippaHOSE PRO 26 Double Valved End Coupling to 1/2 Female Thread.
This fitting is most commonly used on our GrippaMAX Van Mount Systems.
Note - 1/2" Rubber Washer is not included - but can be found in the related products on this page

GrippaHOSE PRO 26 NP VALVED End Coupling to 1/2" / 13mm Hose Barb

Suitable for maximum of 150lpm transfer system 1" Female Bsp thread Features handy trigger overide lock

EZ-Snap™ Type 6mm Female End-Stop Double Valved Coupling

EZ-Snap™ Type 5mm Valved Hose Tail / Male Plug
Available in 5mm for pole hose, 6mm for microbore, or 8mm for minibore.

High Quality Pole Hose

New Formulation - UK Manufactured

Yellow dual-layer reinforced construction 9mm outer diameter 5mm inner diameter
Stronger, tougher and more flexible than standard PVC pole hose
55g per metre (36% heavier than standard pole hose)

Please note that if you are wanting to use this pole hose with our 8mm push-fit pole valve you will need to use these 8mm Stem to 6mm barb adapters

Please note that using this pole hose on the hose reel, instead of reel hose, will invalidate its warranty as it is not designed to cope with the extra abrasion, pressure and wear that reel hose can cope with.

HydroHeat™ 100m Reinforced Hose 6mm ID. NEXT DAY DELIVERY.